Water Ionizer Filter Replacing Tips2011-2-26 11:55:26
The water ionizer filter is a type of appliance also called a water ionizer. This device is an appliance that separates water into alkaline water and acid water by a process of electrolysis. Some people call it “the water of life” because it is a powerful antioxidant, neutralizing positively charged free radicals. However, once your filter has outlived its effective life, it is important to replace it as organic matter and detritus gather inside, causing bacterial generation and fermentation. Here are some tips on replacing your water ionizer filter that will ensure the quality of the water you drink.
Tip 1 – Predict the End of Filter’s Life
Most devices require regular filter replacement or they don’t work effectively. If you are the only person at home using the water ionizer, you can consider replacing the filter in 15 months. In a household of 2 persons, the useful life of the filter is up to one year while a family of four should change it in 9 months.
The front panel indicator informs you of the remaining filter life. While standard filters last approximately 12 months, the filter life depends on the source of water, as well as on the frequency of use. So, to choose the most suitable water ionizer, you need to acquaint yourself with its filter-replacing requirements and techniques.
Tip 2 – Replacement Process for the Jupiter Ionizer Brand
The Jupiter ionizer brand is the easiest type to replace: you simply have to pop it in and out. Turn off the water supply and push the right middle point of the filter’s cover, pulling it open. Depress the top of the filter and then pull in backward direction. Prepare the new filter by removing the foil from its top and bottom and insert it into the compartment. To remove residual carbon from the filter, run water through it until it looks clear. Don’t switch the power on before you do that. Now, it is time to run the unit and check for leakages. Re-seat the filter if you notice any. To turn on the power, push the ‘reset’ button for about 5 seconds as to restart the digital computer.
Tip 3 – Screwing/ Unscrewing with Tyent and Chanson
While Tyent and Chanson are a little more complicated, the most important point to remember is to unscrew the old item and screw the new one.
Tip 4 – Watch Out for Computer Chip of KYK
The KYK filter-replacement process is rather complicated. You need to remove the computer chip from the top of the filter. Be cautious because the entire system will go wrong if the computer chip is not reading correctly. You will have an error message until you fix the problem. Next, turn the kyk 1/4 turn and carefully pull it out. Place the filter in or over the sink as it is upside down and water will pour out. Regardless of what brand or type of water ionizer filter you replace, do not forget to turn off the water supply.
EHM Group LIMITED . is specialized in healthcare for many years. With years of endeavor, EHM has developed to be a manufacturing, selling, and after-sale service integrated Hi-tech enterprise of alkaline water ionizer.